How to enable Remote access in TP Link wifi Router

 To enable remote access in TP link wifi Router 

• Login the TP Link Wifi Router (192.168.0.1)
• Go to advance 
• Select System tools 
• Select Administrator 
• here will be show Remote Management Enable it (Port no : 80)
• Allow All for access from any IP in network  

Thanks !!

Configuration of TP Link wifi router through Mobile

Configuration of wifi router through Mobile

1st we need to connect wifi router in mobile via mobile wifi

• Turn on the wifi of mobile 
• See the SSID and Password of wifi Router mentioned back side of the Wifi Router
• Connect with there SSID and Password 
• Go on Chrome 
• Search 192.168.0.1 or 192.168.1.1
• there will be ask for login username and password (mention same of both username : admin  password admin
• after his wifi configuration will be open 
• Go to Advance  > Network  > LAN > 
• Assign IP static or DHCP 
• Go on Advance >  wireless  there edit SSID name (as your choice) 
• Go on Wireless Security edit Password (as your choice)    

Save all configuration and reboot the Router, now wifi route configuration done.

Thanks !!

go to advance select network and choose DHCP or Static and assign ip if static and if required you can also mention here Domain IP address 

go to wireless and change SSID name 

reconnect wifi with New SSID name and login with old pass

go to wireless security and change Password as you think  and again reconnect wifi with New SSID and new Password

Reboot wifi Router 

basic configuration is done now you can use network of wifi router...

Thanks !

Configuration of the TP link WiFi Router Through Laptop/Desktop

 Installation of the TP-Link Wifi Router 

1. Configuration through Laptop/Desktop

• Connect wifi with Laptop through LAN Cable 
• LAN cable one point to be connect with wifi LAN point and 2nd point to be connect with Laptop RJ45.
• Now to go network setting and do set on Obtain an IP Address Automatically

For the Guide by Graphic 

Right Click on Ethernet go to these properties

• Select Internet Protocol Version 4 (TCP/Ipv4) and click Properties

• Enable IP Address and DNS server Automatically 
• now wifi is locally connected with Laptop 

Go on Chrome and Search 192.168.0.1

wifi configuration Page will be Open and Username and Password will be ask 

Username : admin

Password : admin

• 1.1

• 1.2

• 1.3

• 1.4

• 1.5

Click on Finish 

Basic Configuration is done on it wifi router will be started to work now you can login and use network of wifi router 

Note : If you are configuring wifi router of any organization than you can assign org DNS Server IP for that login Wifi router and go to 

Advance  >  Network  >  LAN Setting 

There will be show Primary DNS and secondary DNS (assign Your org DNS Server IP)

Thanks !!